When it comes to lengthy corrosion protection, one of the options we will always recommend is Magni Coating’s Magni 565 recipe.
Magni 565 is a chrome-free, two-coat system that combines an inorganic zinc-rich primer with an aluminum-rich organic topcoat. As with all zinc-flake coatings, Magni 565 offers sacrificial corrosion protection.
Magni 565 can be applied via dip-spin or spray.
The primary purpose of any zinc-flake coating is to provide corrosion protection. In regards to salt spray hours, Magni 565 is rated as providing a minimum of 720 hours, upwards of 1000 hours, when applied at the very thin film increment of 13 to 18 microns. This far surpasses any corrosion protection a standard plating or powder coating could provide.
Most of the time when we are contacted about applying the Magni 565 coating it is because a customer has a print where it already specified. However, if you have a corrosion issue and need guidance, please reach out to us. Magni 565 will most likely be one of the options we suggest, among a couple others…due to its rich history of great performance, we know it is a winning recipe